Kirecoo Algae Scraper for Glass Aquariums, 25.6" Fish Tank Cleaner, Stainless Steel Algae Scraper for Fish Tank with 10 Blades, Aquarium Glass Cleaning Tools, Cleaning Accessories

Stainless Steel Materials: Algae scraper for glass aquariums is made entirely of stainless steel, making it resistant to rust. It is suitable for both salt water tanks and fresh water aquariums. Additionally, Stainless steel blades effortlessly cutting through stuff adhering on glass and gets some of the harder buildup off without having to scrape viciously. Easy to use and very effective at keeping the glass absolutely clean.

Extended Handle and Adjustable Length: The aquarium scraper up to a maximum length of 25.6 inch when installed. If desired, you can install without extension handle for a shorter length of 18.1 inch. This fish tank cleaner suitable for aquarium of various sizes. By aquarium cleaning tools, you avoid getting your hands wet, prevent water spillage, and minimize the impact on the fish tank's environment. The algae scraper for fish tank allows you to reach all areas required cleaning.

Improved Hollow Design: The design of the aquarium glass scraper head have improved by adding holes for water to flow through, which means there is less resistance to the aquarium scraper moving underwater when in use. This also reduces the pressure on the handle during use, making it more reliable than other fish tank accessories. We are committed to improving our fish tank scrapers and providing the best algae scraper for glass aquariums.

Right-angle Scraper-head Design: Aquarium glass scraper features a right-angle scraper-head design, allowing for easy cleaning of the edges of fish tanks and hard-to-reach corners, including the glass dead angle. The blades are sharp, so be care the silicone sealant around the corners of the aquarium during the cleaning process to prevent cracking the tank. Please be cautious when installing algae scrapers and switching replaceable blades.

Tool less Installation: Algae scraper for glass aquariums no additional tools are needed for installation. The installation process is also very simple, just screw the handle of the algae scraper to the long pole, then place the blade between the head of the algae scraper and the stainless steel sheet. Finally tighten the two large screws. you can take it out and install it when you need and disassemble it for storage anytime.